-
Swing Rotary Sample Fixture and Rotation Control System
STX-202A-A swing/rotary sample fixture is mainly used for samples with extremely high requirements for roughness and flatness of sample surface when cutting with a diamond wire saw.
Send Email Details -
Geological Thin Slice Cutting System
STX-202A geological thin slice cutting system is aimed at processing rock samples in geological industry. It can adsorb geological thin slice by connecting an oilless vacuum pump to a suction filter tank and a vacuum chuck. The required thickness is much easier to achieve by suing thinner diamond wire when cutting the slice.
Send Email Details -
Swing Sample Fixture for Diamond Wire Saw
STX-1200-YB swing sample fixture is specially developed and designed for STX-1203 automatic diamond wire saw. It is mainly used for cutting high hardness materials (such as silicon carbide, silicon nitride, alumina ceramics, zirconia, sapphire, Jade, etc.) and low hardness materials (such as barium fluoride, graphite, KDP, etc.). It can also be used for precision cutting of brittle materials such as crystals, ceramics, glass, thermoelectric materials (such as bismuth telluride, lead telluride, silicon germanium alloys, etc.), rock samples, mineral samples, PCB boards, refractory materials, composite materials, biological and biomimetic composite materials or used for cutting difficult-to-cut materials such as metal materials, rubber and other organic materials. STX-1200-YB swing sample fixture swings left and right during operation. It can reduce the contact area between the cutting wire and the sample, prolong the contact time, improve roughness and flatness of the sample surface, and reduce wire cutting traces on the sample. At the same time, STX-1200-YB swing sample fixture is equipped with an elevated frame, which can increase swinging extent of the sample and increase the wire swing speed, thereby increasing the grinding efficiency per unit time and improving the cutting speed of the sample.
Send Email Details -
Axis Swing/Rotary Sample Fixture and Rotation Control System
STX-1200-A axis swing/rotary sample fixture is specially developed and designed for STX-1203 automatic diamond wire saw. It is mainly used for cutting high hardness materials (such as silicon carbide, silicon nitride, alumina ceramics, zirconia, sapphire, Jade, etc.) and low hardness materials (such as barium fluoride, graphite, KDP, etc.). The STX-1200-A axis swing/rotary sample fixture can perform both swing cutting and rotary cutting in the opposite direction to that of the working diamond wire. For a larger or heavier sample, the top part of the sample should be fixed with a spindle, so the sample top will rotate simultaneously with the spindle. In this way, the cutting efficiency per unit time is improved, the actual cutting time is shortened, the service life of the diamond wire is prolonged, the roughness and flatness of the cutting surface is significantly improved, and the cutting wire traces on sample surface are reduced, resulting in a high-quality cutting surface.
Send Email Details -
Electric Wire Installer
STX-2500 (and STX-2500/100QX) electric wire installer is suitable for diamond wire saws. It adopts a low-speed and large-torque motor to drive the spooler, which can rotate CW and CCW. The electric magnetic powder damper controls rotational resistance through current. When in use, install the drive motor together with the fixing plate onto the pulley side of the spooler (remove the original fixing plate), and fix the magnetic powder damper on the side of the device.
Send Email Details -
Heating Plate
The heating plate is specially developed for material processing and material research laboratories. It is made of aluminum as a whole, and a single-chip microcomputer is used as the core control component. The temperature is adjustable, and the heat dissipation is fast after use. The heating plate is mainly suitable for materials whose properties will not change during heating, i.e. materials will not be affected by heating. It is especially suitable for heating temperature-sensitive materials (such as crystals, semiconductors, ceramics, metals, etc.).
Send Email Details -
Low Speed Diamond Saw With 4" Cutting Blades
1. Diamond Saw is a cutting equipment suitable for precision cutting of material analysis samples. Diamond Saw can cut various crystals (sapphire, garnet, etc.), composite materials, organic polymer materials, etc. 2.Diamond Saw can replace different Diamond Saw cutting blades according to different types of cutting materials. 3. Low speed diamond cutting machine is small in size and easy to operate. The spindle rotation speed of Diamond Saw is infinitely adjustable.
Send Email Details -
Coolant Circulating Tank With Pump
It is suitable for small scale production and cooling water transportation. It is mainly used for the UNIPOL series grinding and polishing machines manufactured by our company. YJXZ-12 liquid stirring circulating pump not only has the function of conventional circulating pumps, but also adds stirring function. YJXZ-12 liquid stirring circulating pump can also be used to transport cooling circulating water when the cutting machine is working.
Send Email Details -
Low Speed Diamond Saw With 6" Cutting Blades
1. Low speed saw blade is a cutting equipment. Low speed saw blade is specially designed for materials researchers and is an ideal sample preparation equipment for laboratories in scientific research institutes, colleges and universities, and industrial and mining enterprises. 2. Low speed saw blade is suitable for precision cutting of various crystals, medical materials and other material analysis samples, composite materials and organic polymer materials. 3. The rotation speed of the spindle of the low speed saw blade is infinitely adjustable. During the cutting process, the size of the cut sample is adjusted by relying on a digital micrometer, and the size control is precise.
Send Email Details
