-
Dip Coater (1-200 mm/min) With Drying Oven Up To 100ºC
1.PTL-MMB01 constant temperature lifting coating machine is specially designed for the study of liquid epitaxial film. 2.Constant temperature lifting coating machine adopts a button-type control panel and a single-board computer to control the pulling speed of the wire to make the lifter run smoothly and accurately. 3.Constant temperature lifting coating machine can also be equipped with a thermostatic oven with a temperature of up to 100 ℃, so that the film growing process can be carried out at a constant temperature.
Constant temperature lifting coating machine Constant temperature dip coater with drying oven for R&D lab constant temperature programmed dip coating machineSend Email Details -
Programmable (1-200 mm/min) Dip Coater With Drying Oven
1.PTL-MMB02 millimeter constant temperature programmable control dipping coating machine adopts a color touch screen as the data input and output terminal to set parameters such as pulling speed, dipping time and speed, times of pulling and returning and drying time, etc. 2.Millimeter constant temperature programmable control dipping coating machine is equipped with a thermostatic oven, so that the film growing process can be carried out at a constant temperature, which is conductive for the solidification of the film.
Millimeter Constant Temperature Programmable Control Dipping Coating Machine Pulling Dipping Coating Machine Thermostatic Vertical Lift Coating MachineSend Email Details -
High Vacuum Plasma-enhanced Chemical Vapor Deposition System (PECVD)
Parallel-plate Capacitive PECVD is a technology that uses plasma to activate reactive gases to promote chemical reactions on the substrate surface or near-surface space to form solid-state films. The basic principle of plasma chemical vapor deposition technology is that under the action of high frequency or DC electric field, the source gas is ionized to form plasma, and the low temperature plasma is used as the energy source, an appropriate amount of reactive gas is introduced, and the plasma discharge is used to activate the reactive gas and forms chemical vapor deposition.
Send Email Details -
Spherical Pulsed Laser Deposition System
This system is a research and development equipment for spherical pulsed laser deposition system (PLD). Pulsed laser deposition technology is widely used, and can be used to prepare thin films of various substances such as metals, semiconductors, oxides, nitrides, carbides, borides, silicides, sulfides and fluorides. It is even used to prepare some difficult-to-synthesize material films, such as diamond and cubic nitride films.
Send Email Details -
Small High Vacuum Thermal Evaporation Coater
1. The evaporation area of small high vacuum two-in-one film coat can reach: ø45mm. 2. Evaporation material of small high vacuum two-in-one film coat: Carbon fiber double wire can be selected as a\b respectively. 3. Small high vacuum two-in-one film coat is equipped with a direct-connected double-rotation mechanical pump, which can make the vacuum degree reach 10-2torr.
Small evaporation coating machine Thermal evaporation coater Small high vacuum two-in-one film coaterSend Email Details -
MSK-AFA-W500-AL Large Flat Plate Coating Machine
1. Flatbed coating machine uses precision stepping gearbox motor, PLC accurately controls the coating speed. 2. Flatbed coating machine has good consistency and uniformity for thin film, reducing the loss during processing. 3. We can provide you with customized services according to the quantity, type and other requirements of Sheet film coater with vacuum chuck you provide.
Send Email Details
