-
Desktop Dip Coater With Variable Speed (1-200 mm/min)
1.PTL-MM01 programmable dip coater pulls the sample vertically by pulling the wire. The sample is dipped in the liquid film material for a period of time and then pulled out, so that a film of a certain thickness grows on the surface of the sample. 2.PTL-MM01 programmable dip coater adopts a single-board computer to control the pulling speed of the wire to make the lifter run smoothly and accurately.
Send Email Details -
Millimeter Grade Programmable Dip Coater (1-200 mm/min)
PTL-MM02 Program-controlled dip coater pulls the sample vertically by pulling the wire. PTL-MM02 programmable dip coater adopts PLC program control to set and adjust the the pulling speed, the dipping time of the sample in the liquid coating material, the speed of the sample entering the liquid, the cycle times of the sample entering and leaving the liquid coating material as well as the drying time of the sample.
Send Email Details -
PLC Controlled Precision Dip Coater (1-200 mm/min)
PTL-MM02-200 Program-Controlled Vertical Dip Coater is a precision equipment specially designed for the study of liquid growing films. The film is grown by vertically pulling the sample that is dipped in liquid coating material. Larger samples can be coated, and the size of samples can reach 310mm×260mm with thickness of 1mm-5mm.
Send Email Details -
Programmable Dip Coater ( Bridgman ) With Atmosphere Control
PTL-HT High Temperature Dip Coater is widely used in the study of various high-temperature pulling and coating. The heating furnace tube can provide a pulling and coating temperature of up to 1000℃. PTL-HT high temperature dip coater is especially suitable for materials that grow thin films at high temperatures, such as ceramic thin films, crystal thin films, battery material thin films, and special nano thin films.
Send Email Details -
Micron Range Programmable Dip Coater With Drying Oven
1. Micron range programmable dip coater adopts PLC program control and high-precision stepper motor drive, and the lifting operation is smooth and accurate. 2. Micron range programmable dip coater supports two modes: "single-pass operation" and "full-pass operation" to meet diverse experimental needs. 3. Micron range programmable dip coater can independently set the rising and pulling speed, the descending liquid entry speed, the immersion residence time, the drying time and the number of cycles to accurately control the coating process.
Micrometer grade programmable lab dip coater Micron Range Programmable Dip Coater Micron Grade Thermostatic Dip CoaterSend Email Details -
Nanometer Range Programmable Dip Coater With Drying Oven
1. The speed setting range of nanometer range programmable dip coater is between 1-500nm/s, and the effective dipping length is 60mm. 2. The dwell and drying time of nanometer range programmable dip coater is set to 1-999s, and the number of pulls is 1-20 times. 3. The size of the sample substrate is 75mm×25mm×2.5mm (2 pieces can be clamped at the same time).
Nanometer Range Programmable Dip Coater Nanometer Grade Thermostatic Dip Coater Nanometer Range Programmable Dip Coater with Drying OvenSend Email Details -
5-Position Dip Coater With Speed And Heating Chamber
PTL-OV5P Automatic 5-Position Thermostatic Dip Coater is used for multi-layer (up to 5 layers) dipping and coating of the same sample in different liquid coating materials. The machine is equipped with a pulling wire to fix up to two identical samples for dipping and coating at the same time. After one coating, manually turn the charging beaker to make the sample enter the next coating process. This machine is equipped with a thermostatic oven.
Send Email Details -
6 Position Nanometer Dip Coater With Speed 1-200 mm/min
PTL-OV6P 6-Position Dip Coater can pull and coat up to 6 samples under the same external conditions when working, and solution container can load different liquid coating materials. The pulling time, dipping time and drying time of the sample can be set by program. After one coating, manually turn the charging beaker to make the sample enter the next coating process. This machine is equipped with a thermostatic oven.
Send Email Details -
Dip Coater With 124 L Temperature Chamber For Large Substrate
PTL-MMB02-200 Thermostatic Vertical Dip Coater is a precision equipment specially designed for the study of liquid growing films. The film is grown by vertically pulling the sample that is dipped in liquid coating material under thermostatic field. The machine adopts high precision speed control system and the parameter input terminal of touch screen to realize automatic control over the whole pulling and coating process.
Send Email Details