-
Electric Wire Installer -2
STX-2500-100QX/200QX electric wire installer is suitable for STX-100QX,STX-200QX diamond wire saw. It adopts a low-speed and large-torque motor to drive the spooler, which can rotate clockwise and counterclockwise. The electric magnetic powder damper controls the rotational resistance through current. When in use, install the drive motor together with the fixing plate onto the pulley side of the spooler (remove the original fixing plate), and fix the magnetic powder damper on the side of the device.
Send Email Details -
Diamond Loop Wire
Diamond loop wire is suitable for STX-201 circulating precision diamond wire saw.
Send Email Details
It is small in wire diameter with even diamond particles.
Diamond loop wire has broad application prospects in crystal cutting, especially in high hardness crystal material cutting. -
Micro-tooth Diamond Saw Blade
Micro teeth are pressed at the edge of diamond saw blade, and diamond powder is evenly distributed on each tooth.
Send Email Details
Diamond powder is firmly bonded onto micro teeth.
Micro-tooth diamond saw blade is mainly used to cut materials with certain viscosity and toughness. -
Silicon Carbide Saw Blade
Silicon carbide saw blade is made of silicon carbide of certain particle size and is sintered with binder, so the whole body of blade can perform cutting.
Send Email Details
The hardness of binder is high and the blade is wear resistant。
It has good self-sharpening performance and ultra-thin design, so it is sharp and durable, and the surface condition of the material after cutting is good. It is suitable for cutting various non-ferrous metal materials. -
Cold Mounting Die
Cold mounting dies are used together with CXQ-3000 high throughput cold mounting machine and CXQ-2500 vacuum cold mounting machine, and can be divided into hard cold mounting dies and soft cold mounting dies.
Send Email Details -
Corundum Saw Blade
Corundum saw blade is made of corundum of certain particle size and is sintered with binder.
Send Email Details
The whole body of blade can perform cutting.
The hardness of binder is high and the blade is wear resistant.
It is sharp and durable, causes little waste of materials. -
Oilstone
Oilstone can be used to resharpen the diamond particles on sintered diamond saw blades, electroplated diamond saw blades and electroplated diamond wires.
Send Email Details
Oilstone has high hardness and certain toughness, and has good thermal conductivity. -
Epoxy Resin & Hardener
Epoxy resin & hardener is used together with CXQ-3000 high throughput cold mounting machine and CXQ-2500 vacuum cold mounting machine.
Send Email Details
Epoxy resin & hardener is transparent and sticky fluid without mechanical impurities.
Epoxy resin & hardener can cure quickly with strong adhesion. -
LubeCool for Cutting
LubeCool is solid powder to make lubricant and coolant for cutting.
Send Email Details
It performs well in lubricating, cooling, rust-resisting and cleaning, and it can prolong the service life of blades, improve cutting efficiency and lower production cost.
