Programmable Vacuum Chuck Spin Coater (500-6000 rpm, 8" Max)

Brand Shenyang Kejing

Product origin Shenyang, China

Delivery time 10 working days

Supply capacity 50 sets

VTC-200 Vacuum Spin Coater has the advantages of simple operation, convenient cleaning and small size. It is mainly used in the film growing process in laboratories of colleges and universities and scientific research institutes. During working, VTC-200 vacuum spin coater uses vacuum plate adsorption method to fix the sample onto the sample plate. The equipment uses two-stage program to control the speed.

Email

Programmable Vacuum Chuck Spin Coater (500-6000 rpm, 8" Max)

Main Features

1. The speed is controlled by a two-stage program.

2. The sample is fixed by vacuum adsorption, which is easy to operate.

3. Cast aluminum structure, stable operation and low noise

Technical Parameters

Product Name	VTC-200 Vacuum Spin Coater
Product Model	VTC-200
Installation Conditions	1. Temperature and humidity: 10-85%RH (at 25℃ without condensation) Temperature: 0-45℃. 2. There is no strong vibration source and corrosive gas around the equipment. 3. Water: Not required 4. Electricity: Single phase: AC220V 50Hz National standard three-pole socket 10A must be well grounded 5. Gas: Vacuum negative pressure (vacuum pump) exhaust flow rate is not less than 70L/M 6. Workbench: 800X600X700mm recommended bearing weight of 100KG or more (solid cement platform is better) 7. Ventilation device: No special requirements
Main Parameters (Specification)	1. Power supply interface: Power socket with insurance: AC220/110V 50/60Hz, insurance tube specification is 10A, φ5×20mm 2. Total power: ≤150W 3. Sample tray (suction cup + baffle): φ153mm polypropylene vacuum suction cup 1 piece: 6-inch (φ153mm) sample baffle 1 set 8-inch (φ203.5mm) sample baffle 1 set 4. Operation mode: counterclockwise rotation with two operation stages 5. Coating speed: SPD1 speed: 500-6000 RPM effective SPD2 speed: 500-6000 RPM effective 6. Coating time: T1 time: 1--600s effective T2 time: 1--600s effective 7. Speed stability: ±1% 8. Control mode: PCB single-chip microcomputer key control Digital tube display Note: To avoid damage to the device due to misoperation/mistouch during use by customers, the "voltage conversion switch" at the rear of the domestic standard device only supports AC220V 50Hz power supply. If you need a device that can be converted from AC220V/AC110V 50HZ/60Hz, please communicate with our sales staff. The actual power supply of the device shall be subject to the label attached to the rear of the product.
Product Dimension and Weight	Dimension: 500mm×350mm×400mm Weight: 30kg