-
Precision Dicing Saw With 12 Inches Round And 280mm Square Workbench
1. The precision cutting saw is suitable for processing large-size samples, with a maximum processing size of φ12 and a standard imported 2.4KW high-torque spindle; 2. The precision cutting saw can be equipped with optional non-contact height measurement (NCS); optional blade breakage detection (BBD); 3. The θ axis of the precision cutting saw uses a direct-drive DD motor with high precision and high speed;
Send Email Details -
Precision Dicing Saw with 8 inches round and 205mm square workbench
1.SYJ-1802precision wafer dicing saw adopts imported air static pressure spindle, which has the characteristics of high precision, good rigidity, high output power, low noise and long life. 2.The spindle speed of Precision wafer dicing saw is set independently, and the running status is monitored in real time. 3.The X, Y and Z axes of Precision wafer dicing saw adopt imported linear guide rails and ball screws, and the Y axis grating is fully closed-loop controlled, mathematical model fitting, and the precision is higher. The workbench is 8-inch round and 205mm square.
Send Email Details -
Crystal Directional Cutting All-in-one Machine
1. Diamond Wire Cutting Saw employs high-precision cutting technology. 2. Diamond Wire Cutting Saw has low cutting loss. 3. Diamond Wire Cutting Saw features strong stability.
Diamond Wire Cutting Saw Automated Diamond Wire Cutting Saw High Precision Diamond Wire Cutting MachineSend Email Details -
Electric Wire Installer -2
STX-2500-100QX/200QX electric wire installer is suitable for STX-100QX,STX-200QX diamond wire saw. It adopts a low-speed and large-torque motor to drive the spooler, which can rotate clockwise and counterclockwise. The electric magnetic powder damper controls the rotational resistance through current. When in use, install the drive motor together with the fixing plate onto the pulley side of the spooler (remove the original fixing plate), and fix the magnetic powder damper on the side of the device.
Send Email Details -
Diamond Loop Wire
Diamond loop wire is suitable for STX-201 circulating precision diamond wire saw. It is small in wire diameter with even diamond particles. Diamond loop wire has broad application prospects in crystal cutting, especially in high hardness crystal material cutting.
Send Email Details -
Micro-tooth Diamond Saw Blade
Micro teeth are pressed at the edge of diamond saw blade, and diamond powder is evenly distributed on each tooth. Diamond powder is firmly bonded onto micro teeth. Micro-tooth diamond saw blade is mainly used to cut materials with certain viscosity and toughness.
Send Email Details -
Silicon Carbide Saw Blade
Silicon carbide saw blade is made of silicon carbide of certain particle size and is sintered with binder, so the whole body of blade can perform cutting. The hardness of binder is high and the blade is wear resistant。 It has good self-sharpening performance and ultra-thin design, so it is sharp and durable, and the surface condition of the material after cutting is good. It is suitable for cutting various non-ferrous metal materials.
Send Email Details -
Cold Mounting Die
Cold mounting dies are used together with CXQ-3000 high throughput cold mounting machine and CXQ-2500 vacuum cold mounting machine, and can be divided into hard cold mounting dies and soft cold mounting dies.
Send Email Details -
Corundum Saw Blade
Corundum saw blade is made of corundum of certain particle size and is sintered with binder. The whole body of blade can perform cutting. The hardness of binder is high and the blade is wear resistant. It is sharp and durable, causes little waste of materials.
Send Email Details
