Manual Hydraulic Pellet Press
Brand Shenyang Kejing
Product origin Shenyang, China
Delivery time 22 working days
Supply capacity 50 sets
1. Laboratory hydraulic press is suitable for new materials such as catalysis, silicate, battery, ceramic, powder metallurgy, etc.
2. Laboratory hydraulic press can press materials into sheets, columns, special shapes or combinations through specific molds.
3. Laboratory hydraulic press is small in size, easy to operate and maintain, and suitable for daily use in the laboratory.
Introduction of laboratory pellet press:
Laboratory pellet press relies on hydraulic press to apply pressure to the sample in the mold, so that the upper and lower surfaces of the sample are subjected to pressure in opposite directions, so that a small amount of sample is pressed into a sheet or a large amount of sample is pressed into a column. Laboratory pellet press can also be used in conjunction with calcium iron analyzer, infrared spectrum (IR) analyzer, X-ray fluorescence (XRF) analyzer, and analyzer is used to analyze the pressed samples. YLJ-60TH laboratory pellet press is small in size, simple and convenient to operate, easy to clean and maintain, so it is widely used in colleges and universities and scientific research institutes. Different types of presses can be used to press samples according to the size of the sample and the required pressure.
Advantages of laboratory pellet press:
1. Manual laboratory hydraulic press is small in size, light in weight, does not leak oil, is easy to carry, and can be used in a glove box.
2. Manual laboratory hydraulic press adopts an integrated structure, with oil pool, main board, and oil cylinder on one body, without sealing connection, reducing oil leakage.
3. Manual laboratory hydraulic press be equipped with a digital pressure gauge, which has precise pressure control and a pressure display accuracy of 0.01MPa.
Technical parameters of manual laboratory hydraulic press:
| Product name | YLJ-60TH Manual Protection Press |
| Product model | YLJ-60TH |
| Technical parameters | 1. Rated pressure range (tons): 0-60T (max). 2. Allowable working pressure range (MPa): 0-33 (max). 3. Pressure gauge (optional): Pointer type/electronic digital display. 4. Piston diameter (mm): Φ150. 5. Piston stroke (mm): 50. 6. Number of columns (roots): 4. 7. Column spacing (mm): 185×250. 8. Protective cover (plexiglass) (optional). |
| Product specifications | Dimensions: 405×240×565mm; Weight: 150kg. |
| Note: All standard equipment is bare metal. If you need molds, please order them separately. | |
Precautions for use:
1. Before use, the screw on the oil cylinder must be loosened (tightened during transportation), the oil valve must be loosened, the pressure handle of the small piston must be shaken, and the air must be removed from the system by a few strokes.
2. When pre-tightening the pressurized sample with a screw rod, do not use too much force.
3. When repairing, close the valve at the rear seat of the oil cylinder to prevent the oil in the oil cylinder from flowing out.
About us:
We are not just a supplier, but also a provider of scientific research services. We serve the society with innovative technology, always put customers' needs first, and are committed to providing customers with the best solutions. We pursue excellence and to become a well-known brand of domestic materials analysis instruments and win respect and truststrive in the international market. When you choose Shenyang Kejing, you will choose a dynamic and progressive partner.
