-
Desktop Dip Coater With Variable Speed (1-200 mm/min)
PTL-MM01 Dip Coater pulls the sample vertically by pulling the wire. The sample is dipped in the liquid film material for a period of time and then pulled out, so that a film of a certain thickness grows on the surface of the sample. PTL-MM01 dip coater adopts a single-board computer to control the pulling speed of the wire to make the lifter run smoothly and accurately.
Send Email Details -
Millimeter Grade Programmable Dip Coater (1-200 mm/min)
PTL-MM02 Program-Controlled Dip Coater pulls the sample vertically by pulling the wire. PTL-MM02 programmable dip coater adopts PLC program control to set and adjust the the pulling speed, the dipping time of the sample in the liquid coating material, the speed of the sample entering the liquid, the cycle times of the sample entering and leaving the liquid coating material as well as the drying time of the sample.
Send Email Details -
6 Position Programmable Dip Coater With Speed 1-400 mm/min
PTL-6P Six-Position Dip Coater can pull one sample at a time, and can make the sample rotate counterclockwise through program control. The sample is pulled out for drying after being dipped in the charging beakers for a certain period of time. The dipping time and drying time can be set through programming. The six charging beakers of PTL-6P six-station dip coater can be loaded with the same coating material or different coating materials separately.
Send Email Details -
6 Position Programmable Dip Coater With Bottom Heating
PTL-6PB Six-Position Dip Coater is equipped with six temperature-controlled meter, which can heat the charging beaker during film coating process. The six beakers can be heated with the same temperature or different temperatures, depending on the coating materials loaded in the beakers. This machine is suitable for liquid coating materials or solid coating materials that can be melted into flowing liquid after heating.
Send Email Details -
Dip Coater (1-200 mm/min) With Drying Oven Up To 100ºC
PTL-MMB01 Thermostatic Dip Coater is specially designed for the study of liquid epitaxial film. It adopts a button-type control panel and a single-board computer to control the pulling speed of the wire to make the lifter run smoothly and accurately. The machine can also be equipped with a thermostatic oven with a temperature of up to 100 ℃, so that the film growing process can be carried out at a constant temperature.
Send Email Details -
Programmable (1-200 mm/min) Dip Coater With Drying Oven
PTL-MMB02 milimeter grade thermostatic dip coater adopts a color touch screen as the data input and output terminal to set parameters such as pulling speed, dipping time and speed, times of pulling and returning and drying time, etc. This machine is equipped with a thermostatic oven, so that the film growing process can be carried out at a constant temperature, which is conductive for the solidification of the film.
Send Email Details -
Micron Range Programmable Dip Coater With Drying Oven
PTL-UMB Micron/Micrometer Grade Thermostatic Dip Coater is based on micrometer calculation and is specially designed for dipping and coating in liquid coating materials. This machine is equipped with a thermostatic oven, so that the film growing process can be carried out at a constant temperature, which is conductive for the solidification of the film.
Send Email Details
