-
Micron Range Programmable Dip Coater With Drying Oven
1. Micron range programmable dip coater adopts PLC program control and high-precision stepper motor drive, and the lifting operation is smooth and accurate. 2. Micron range programmable dip coater supports two modes: "single-pass operation" and "full-pass operation" to meet diverse experimental needs. 3. Micron range programmable dip coater can independently set the rising and pulling speed, the descending liquid entry speed, the immersion residence time, the drying time and the number of cycles to accurately control the coating process.
Micrometer grade programmable lab dip coater Micron Range Programmable Dip Coater Micron Grade Thermostatic Dip CoaterSend Email Details -
Nanometer Range Programmable Dip Coater With Drying Oven
1. The speed setting range of nanometer range programmable dip coater is between 1-500nm/s, and the effective dipping length is 60mm. 2. The dwell and drying time of nanometer range programmable dip coater is set to 1-999s, and the number of pulls is 1-20 times. 3. The size of the sample substrate is 75mm×25mm×2.5mm (2 pieces can be clamped at the same time).
Nanometer Range Programmable Dip Coater Nanometer Grade Thermostatic Dip Coater Nanometer Range Programmable Dip Coater with Drying OvenSend Email Details -
5-Position Dip Coater With Speed And Heating Chamber
PTL-OV5P Automatic 5-Position Thermostatic Dip Coater is used for multi-layer (up to 5 layers) dipping and coating of the same sample in different liquid coating materials. The machine is equipped with a pulling wire to fix up to two identical samples for dipping and coating at the same time. After one coating, manually turn the charging beaker to make the sample enter the next coating process. This machine is equipped with a thermostatic oven.
Send Email Details -
6 Position Nanometer Dip Coater With Speed 1-200 mm/min
PTL-OV6P 6-Position Dip Coater can pull and coat up to 6 samples under the same external conditions when working, and solution container can load different liquid coating materials. The pulling time, dipping time and drying time of the sample can be set by program. After one coating, manually turn the charging beaker to make the sample enter the next coating process. This machine is equipped with a thermostatic oven.
Send Email Details -
Dip Coater With 124 L Temperature Chamber For Large Substrate
PTL-MMB02-200 Thermostatic Vertical Dip Coater is a precision equipment specially designed for the study of liquid growing films. The film is grown by vertically pulling the sample that is dipped in liquid coating material under thermostatic field. The machine adopts high precision speed control system and the parameter input terminal of touch screen to realize automatic control over the whole pulling and coating process.
Send Email Details -
4-Position Dip Coater With Magnetic Stirrer and Heating
PTL-MM02-200-4 4-Position Dip Coater can pull/dip two samples at the same time, and the samples can be dipped in the beaker for a certain time and then pulled out for drying through program control.
Send Email Details -
Servo Micron Grade Thermostatic Dip Coater
PTL-UMB01 Servo Micron Grade Thermostatic Dip Coater is designed for dipping the film in the liquid phase. By coating the substrate in the loading cup for a certain time and then pulling it out vertically, the film grows on the surface of the sample in the liquid phase.
Send Email Details -
PLC Controlled Precision Dip Coater (10-1000mm/min)
The PTL-MM02-1000 PLC Controlled Precision Dip Coater is a precision equipment designed specifically for the study of liquid phase growth films. The film is grown by vertically dipping samples in the liquid phase in a constant temperature field. The machine adopts high precision speed control system and parameter input terminal of touch screen to realize automatic control of the whole process of dipping film.
Send Email Details
