How To Operate A Split Type Electric Hydraulic Pellet Press?
YLJ-150TA split type electric hydraulic pellet press is widely used in the fields of new materials, superconducting materials, powder ceramics, new power materials, building materials, etc. It can be pressed into various sheets, columns, special-shaped bodies and assemblies with specific molds for scientific research. The split type electric hydraulic pellet press does not require manual pressurization when working. It relies on electric continuous pressurization and pressure maintenance, and manual pressure relief after the pressure maintenance is completed. The split type electric hydraulic pellet press applies pressure to the sample in the mold, so that the upper and lower surfaces of the sample are subjected to pressure in opposite directions, so that a small amount of sample is pressed into a sheet or a large amount of sample is pressed into a column. Let's take a look at how it works!
Simple and intuitive operation interface:
Setting function of split electric tablet press: Press the SET key to enter the setting interface. Press the set key again to move the cursor to different parameter options, including the upper limit of pressure, the lower limit of pressure, the holding time and the setting of the mold diameter. After completing the parameter setting, press the SET key again to return to the operation interface.
Numerical adjustment of split electric tablet press: Press the + key or - key to quickly adjust the parameter value to meet different needs in the experiment.
Achieve efficient and safe operation through a variety of buttons:
Stop: When the split electric tablet press is running, press the STOP button, the motor stops running, and the pressure relief valve is opened to release the pressure.
Release: Press the release button and the split electric tablet press starts running. When the pressure exceeds the specified value or the limit switch is pressed, the equipment automatically stops and releases the pressure. It can also be stopped manually.
Sampling: Press the SAMPLE button and the equipment starts running; When the pressure exceeds the specified value, the pressure is stopped and maintained; When the pressure is lower than the lower limit, the equipment automatically compensates; When the timing ends, the equipment automatically releases the pressure.
Emergency stop function: In case of emergency, press the STOP button, the equipment will immediately stop and release the pressure to ensure the safety of the use process.
Scientific operation steps:
1. Put the assembled mold into the equipment and tighten the screws.
2. Enter the setting interface and set the required upper and lower limits of pressure, holding time and mold diameter.
3. Short press the SET button to complete the parameter setting and return to the operation menu.
4. Press the start button, the equipment will run automatically, and automatically release pressure and reset after completing the tableting process.
Split electric tablet press adopts intelligent pressure control and automatic pressure relief mechanism, which can provide comprehensive safety protection while conducting experiments efficiently. Whether it is scientific research experiments or industrial production, it has shown excellent performance:
1. Accurate pressure control to ensure the repeatability of experimental results.
2. Fully automated operation greatly reduces the complexity of manual intervention.
3. Emergency protection design provides a safety line for the user's experimental process.
I hope that the news content of this article can help you in the future use process. If you want to know more product information or get samples, please contact us! In the future, you can also receive regular updates from us on new products and new technologies. If you have any comments or suggestions, you are also welcome to give feedback at any time, and we will continue to optimize and improve to bring you better services.