Operation of HPM-1.6 Constant Force Manual Press

Constant Manual Small Press is a manually operated device designed for precision pressing, stamping, forming and other processes. Our Constant Manual Small Press is small in size, light in weight and easy to operate, so it is suitable for use in colleges, universities, research institutes and other scenarios.

Before operating the Constant Manual Small Press, we first need to check the equipment: 1. Confirm that the components of the press (handle, pressure gauge, slide, mold, etc.) are not loose 2. Clean the surface of the workpiece to be pressed, remove burrs or oil stains, and avoid uneven pressure 3. Pay attention to the safety protection of the Constant Manual Small Press, wear gloves and goggles, remove debris from the work surface, and ensure that the emergency stop button (if any) can be triggered normally.

In the process of operating the Constant Manual Small Press, first accurately position the workpiece in the center of the lower die, and fix it with a locating pin or fixture if necessary. Secondly, slowly press the handle: apply force evenly and observe the pressure gauge pointer until the preset pressure value is reached. After reaching the target pressure, maintain the handle position of the Constant Manual Small Press for a few seconds to ensure that it is pressed in place. Finally, use the tool to remove the finished product, and avoid your hands directly entering the pressing area.

Precautions for using HPM-1.6 Constant Force Manual Press:

1. It is strictly forbidden to overload the Constant Manual Small Press (more than 1.6 tons) to prevent deformation or damage to the equipment.

2. Models without pressure gauges need to rely on hand feel. It is recommended to test the waste material to get familiar with the strength before using the HPM-1.6 Constant Force Manual Press.

3. If you encounter a jam during press fitting, stop the operation of the product immediately, check the workpiece or mold problem, and do not force the press.

4. When the pressure gauge of the HPM-1.6 Constant Force Manual Press jumps abnormally, stop using it and calibrate it.

5. Clean the workbench of the HPM-1.6 Constant Force Manual Press after daily use, check the fatigue of the screw/spring regularly, and apply anti-rust oil to the HPM-1.6 Constant Force Manual Press regularly.

If you have any questions about the product specifications, technical parameters or purchasing of HPM-1.6 Constant Force Manual Press, or encounter technical difficulties in the actual operation of HPM-1.6 Constant Force Manual Press, our professional team is always ready to provide you with support.

Welcome to contact us, we will answer you and provide customized solutions as soon as possible!