What Should I Pay Attention To When Using Diamond Saw Blade?
Precautions before use:
1. Please pay attention to protective measures, such as eye protection, masks, gloves, etc., and be sure to use a saw machine with a protective cover.
2. When installing the diamond saw blade, be sure to tighten the fastening nut to prevent the saw blade from jumping during use.
3. Please note that the installation direction is consistent with the direction of the cutting equipment.
4. Clean the surface of the cutting equipment before use. Do not have steel bars, wires and easily entangled items, which May cause the saw blade to crack. If there are debris and debris during use, please clean them in time.
Precautions during use:
Diamond saw blade will generate heat when cutting. In order to avoid deformation and shortening of the saw blade, please ensure the following cutting conditions when cutting:
1. Adequate water supply.
2. The water pipe for water supply is at the cutting part of the saw blade.
3. If the water supply is interrupted unexpectedly, please restore the water supply as soon as possible, otherwise it is recommended to suspend cutting.
How to maintain the diamond saw blade?
1. After buying a diamond saw blade, if you are not using it at the time, you must not touch the blade head of the thin diamond saw blade with your hands, because the merchant will spray a layer of anti-rust paint on the blade head. If you touch it with your hands, the anti-rust paint will easily peel off, which will expose the blade head of the thin diamond saw blade to the air and oxidize, which will cause rust and affect the appearance of the diamond saw blade.
2. After using the thin diamond saw blade, you should protect the base body, handle it with care, and never drop it, because the thin diamond saw blade base body can be reused. If the base body is deformed, the blade head cannot be welded. Maintaining the base body is equivalent to buying a new saw blade at a low price.
The above is an introduction to how to use the thin diamond saw blade. Under a given cutting productivity, the feed speed also has a great influence on the wear of the saw blade. In actual operation, the speed of feeding, retracting, and exiting should be slow, the speed during cutting should be uniform, and the saw blade should run smoothly and reduce vibration. The above is what we shared today. Shenyang kejing will also update the information on how to use and maintain the products from time to time. If you want other product usage precautions and maintenance methods, please leave us a message!